Radioconstructor `` Start IP-1 '' (Power supply).
Radio and electrical constructors, sets.Power suppliesRadioconstructor "Start IP-1" (Power supply) has been producing Riga software "Kommutator" since the 1st quarter of 1989. RK is intended for novice radio amateurs interested in building high-quality radio equipment. The set contains assemblies, parts and structural elements, from which you can assemble a high-quality MT, which provides the blocks that are part of the combined digital measuring device with supply voltages, as well as additional (external) loads. The kit provides two options for assembling the device: I - DC voltage value: 4 ... 9 V + 15 and -15 V. II - DC voltage value: + 5 V + 15 and -15 V. Power supply "IP-1 "is a device that supplies voltage to the entire radio measuring complex, consisting of designers: digital frequency meter" ChTs-1 ", voltage-frequency converter" PNCH-1 ", audio frequency signal generator" GZCH-1 ", RLC meter" I-1 " , power supply with logic probe "IP-2". All measuring devices assembled from these sets have the same dimensions and design and can be mechanically and electrically combined into a complex. Correctly assembled and debugged power supply unit provides the following parameters: DC voltage at the output according to I and II assembly options; the value of the output current at each output is not more than 100 mA; protection against short-circuit in the load and indication of the presence of output voltages. The device has three outputs for connecting other measuring devices of the complex and three outputs for connecting external loads.
