Network reel-to-reel tape recorder `` Comet-118-stereo ''.
Reel-to-reel tape recorders, stationary.Reel-to-reel tape recorders, stationaryThe network reel-to-reel tape recorder "Comet-118-stereo" was developed in 1978 at the Novosibirsk Precision Engineering Plant. The tape recorder has been prepared for serial production since 1980, but for a number of reasons it was never put into production. Several prototypes were made, and in several design options. The "Comet-118-stereo" tape recorder is intended for recording and reproducing speech music phonograms. The tape drive mechanism is three-engine. The tape recorder provides remote control of all modes of LPM operation, re-recording of phonograms from track to track, reverse of the working stroke in playback mode, control of the recorded or reproduced signals through built-in speakers or speakers and by arrow indicators. There is a noise suppressor in pauses of phonograms and a device for creating artificial reverberation. The belt tension is stabilized in all operating modes. Recommended magnetic tape type A4409-6B. The speed of pulling the magnetic tape is 19.05; 9.53 cm / sec. Knock coefficient at speed: 19.05 cm / s ± 0.1%, 9.53 cm / s ± 0.2%. Rated output power at a load of 4 0m - 2x25 W. The frequency range at the linear output at speeds: 19.05 cm / s - 40 ... 20000 Hz, 9.53 - 40 ... 14000 Hz. Consumed from email network power - 180 watts. The dimensions of the tape recorder are 433x503x224 mm. Weight 28 kg.
